Pyro wrote:Sometimes you just have to figure out what you are missing as no one else might have what you want. Check if the myth_log tells you what you are missing. If not, open Fear and look at each tag. It might not be obvious, but there must be a missing tag that is stopping it from working. OR if you placed these tags inside a local folder with other tags, there might be a conflict with 2 tags having the same ID.
Hi Pyro,
I open Fear and look at each tag. but not found there a missing tag that is stopping it from working.
and placed these tags inside a local folder without other tags, also cleaned the entire folder before.
I not found a conflict with 2 tags having the same ID.
this unit, it will not work with version 1.7.2 Myth?
Look here Myth_log :
2013-02-26 16:11:40
Myth II Build 374 running under Modern Windows 5.010000 ----------------------------------------------
Loading poweruser.txt... not found.
Scanning for software devices...
Found 1 to use
Scanning for Direct3D devices...
Found 1 to use
Scanning for 3Dfx devices...
Found 0 to use
Scanning for OpenGL devices...
Found 1 to use
Intel 945G | Intel | OpenGL 1.4
Initialized for DirectSound3D using COM
Loading Patch Files...
marius net Patch
Patch 1.2
Patch MariusNet
Patch 1.3
marius net DNS
Patch 1.4
Patch 1.4 Interface
Patch 1.5
Patch 1.7 Templates
Loading Patch Files Succeeded
Running Direct3D at 1024 x 768
Starting mesh "Willow Creek"...
Using 1.7.2 gameplay...
Myth Crashed: EXCEPTION_ACCESS_VIOLATION
Attempting Stack Trace...
Error loading dbghelp.dll.
Stack Trace Failed
Recording Buffers Flushed
I did not have
dbghelp.dll then downloaded it, and put in the local folder. but continued failed myth.
Julio