Page 1 of 1
Help
Posted: Tue Feb 16, 2010 5:44 pm
by Falcon
Constant Myth Crashing : 1st time ever .
I did new windows ... Updated my ram from 512 to 1.50 and now having crashes ..
MYTH LOG
2010-02-16 14:25:11
Myth II Build 329 running under Modern Windows 5.010000 ----------------------------------------------
Loading poweruser.txt... not found.
Scanning for software devices...
Found 1 to use
Scanning for Direct3D devices...
Found 1 to use
Scanning for 3Dfx devices...
Found 0 to use
Scanning for OpenGL devices...
Found 1 to use
Using GDI for Input
Mouse appears to have 3 buttons and 3 axes.
Initialized for DirectSound3D using COM
Loading Patch Files...
Patch 1.2
Patch MariusNet
Patch 1.3
Patch 1.4
Patch 1.4 Interface
Patch 1.5
Patch 1.7 Templates
Loading Patch Files Succeeded
Warning: Unable to find cutscene 'prologue'.
Establishing connection with metaserver at myth.mariusnet.com:6321...
Connected.
Disconnecting from metaserver.
Warning: Unable to find cutscene 'prologue'.
Establishing connection with metaserver at myth.mariusnet.com:6321...
Connected.
Running Software at 1024 x 768, 16 bit
Starting mesh "If I Had a Trow..."...
Using 1.6.0 gameplay...
Myth Crashed.
SPEC
OS : Windows XP SP2
System : Intel Celeron 2.13 (2x)
Graphics Card : Nvidia Gforce MX440 with AGP8X
Current Myth Ver : 1.7
Myth Preference :
Software (crash)
OpenGL (white screen)
Direct3d (grains)
_______
w00t
Re: Help
Posted: Tue Feb 16, 2010 5:58 pm
by Pyro
You sure you used the correct type of ram or if your motherboard can handle that much? Are your graphics drivers up to date? Did you try the 1.7.1 beta?
Re: Help
Posted: Tue Feb 16, 2010 6:25 pm
by Myrd
Please try running a memory testing utility, like this one:
http://hcidesign.com/memtest/
It's possible that the new RAM you installed has a hardware problem - running a memory check utility would help determine if that's the case.
Re: Help
Posted: Tue Feb 16, 2010 10:13 pm
by GodzFire
Update to Service Pack 3
Re: Help
Posted: Wed Feb 17, 2010 4:19 pm
by Falcon
So I gave up on that board ....
Got this new Intel Pentium 4 desktop board - 2.4 Ghz Ram ...
Ram is RD with 512 memory ...
Reinstalled windows ..
1.7 window ( with Fear and Loathing )
..
OS : Windows XP Service Pack -2 (Windows Installer 3.1 redis)
Card : GFORCE MX440 with AGP8X
direct3d and software working fine but when i run OpenGL .. The box with hints and objectives is white and all other screen is black .. After a pause of 3-4 seconds it will crash
Yet again myth Log for u guys
LOG :
2010-02-18 02:17:41
Myth II Build 329 running under Modern Windows 5.010000 ----------------------------------------------
Loading poweruser.txt... not found.
Scanning for software devices...
Found 1 to use
Scanning for Direct3D devices...
Found 1 to use
Scanning for 3Dfx devices...
Found 0 to use
Scanning for OpenGL devices...
Found 1 to use
Using GDI for Input
Mouse appears to have 3 buttons and 3 axes.
Initialized for DirectSound3D using COM
Loading Patch Files...
Patch 1.2
Patch 1.3
Patch 1.4
Patch 1.4 Interface
Patch 1.5
Patch 1.7 Templates
Loading Patch Files Succeeded
Warning: Unable to find cutscene 'prologue'.
Running OpenGL at 1152 x 864, 16 bit
Starting mesh "Willow Creek"...
Myth Crashed.
______
PS :
All the preferences are random ( as per you guys set it e.g FPS etc)
tried to run on 1152 x 864
Re: Help
Posted: Wed Feb 17, 2010 4:22 pm
by Falcon
btw where to upload my graphic card ?
when I go to nvidia and try to download a update some gay software installs which is good for nothing
GEFORCE MX440 WITH AGP8X
well i tried to change it too but have a lil money shortage ... I think it should be able to run a game like myth
Re: Help
Posted: Wed Feb 17, 2010 4:23 pm
by GodzFire
Update..........to........Service..........Pack..........3
Re: Help
Posted: Wed Feb 17, 2010 4:26 pm
by Falcon
dude why won't I - but microsoft people are gay and the send in some file named WGA that won't allow it to install .... Sadly you don't find any genuine windows here ... I tried torrents though and it had like 18 leechers and 3 seeders .... BOMB ME !
Re: Help
Posted: Wed Feb 17, 2010 5:37 pm
by vinylrake
bwahahahahha... blame microsoft because your bootleg OS won't run?
good one.
Re: Help
Posted: Wed Feb 17, 2010 5:53 pm
by Myrd
You should be able to find updated drivers for your video card at nvidia.com
Re: Help
Posted: Wed Feb 17, 2010 5:55 pm
by GodzFire
That's because you're using an illegal copy of Windows you dumb boob. WGA stands for 'Windows Genuine Advantage' which checks for bad copies.
Don't expect ANY help from us running illegal software.
Re: Help
Posted: Wed Feb 17, 2010 6:23 pm
by Falcon
2010-02-18 03:58:31
Myth II Build 329 running under Modern Windows 5.010000 ----------------------------------------------
Loading poweruser.txt... not found.
Scanning for software devices...
Found 1 to use
Scanning for Direct3D devices...
Found 1 to use
Scanning for 3Dfx devices...
Found 0 to use
Scanning for OpenGL devices...
Found 1 to use
Using GDI for Input
Mouse appears to have 3 buttons and 3 axes.
Initialized for DirectSound3D using COM
Loading Patch Files...
Patch 1.2
Patch MariusNet
Patch 1.3
Patch 1.4
Patch 1.4 Interface
Patch 1.5
Patch 1.7 Templates
Loading Patch Files Succeeded
Warning: Unable to find cutscene 'prologue'.
Establishing connection with metaserver at myth.mariusnet.com:6321...
Connected.
Running OpenGL at 1024 x 768, 16 bit
Starting mesh "Gimble in the Wabe"...
Quitting networked game...
Disconnecting from metaserver.
Warning: Unable to find cutscene 'prologue'.
Running OpenGL at 1024 x 768, 16 bit
Starting mesh "Willow Creek"...
Quitting single player game...
Warning: Unable to find cutscene 'prologue'.
w00t thanks myrd - updating worked
gg vinylfake
Re: Help
Posted: Wed Feb 17, 2010 7:22 pm
by GodzFire
You idiot, VR is still right. Try updating to SP3 and the most current updates.
How much luck do you have?